DIY - Rustic Serving Tray

I made this easy project using a left over piece of 1x12 from another project! I decided to make it 18" long. For the sides I used 1x3. Measure each side & cut at 45 degrees off square. For added support, I attached the sides with PH screws from the bottom/underneath using my Kreg Jig & wood glue! To connect the 4 corners - I used wood glue & 1 1/4" finish nails.  Use your power sander to distress the paint if you like the way mine looks; I say - embrace the flaws in your wood! Last, add the poly/top coat with a foam brush for added durability.