You too can build this adorable & affordable play table & 2 chairs for only $40! If you were to buy a similar set at Pottery Barn kids it would cost $200+. The chairs cost only about $4 a piece!
I built this table originally with 1x2 for the legs, which was not smart being that we are a Military family & move quite often. So this last move the legs were broken. So I rebuilt the table with 2x2's this time & I hope it will hold up during our next move!
Table shopping list
1 - 1x12 @8ft
1 - 2x2 @8ft
1 - 1x3 @8ft
Cut List for Table
2 - 1x12 @ 32" (Top)
4 - 2x2 @ 21 1/4" (legs)
2 - 1x3 @ 17 1/2" (End aprons)
2 - 1x3 @ 27" (Side Aprons)
This is a really easy build first attach the aprons to the legs using 3/4" pocket holes with your Kreg Jig & 1 1/4 ph screws. Make sure you put PH's on the aprons to attach the top as well.
I used a 1x12 for the top instead of using 3 1x8's like in Ana's version & I like the fact that there is only one crack instead of 2, its perfect for coloring!
If you would like the complete build plan click HERE for Ana White's site.
For the build plan for the chairs go to Ana's site click HERE !
My daughter Blake loves coloring at this table that's just her size!
No comments:
Post a Comment